天津大學機械工程研究生導師介紹：張連洪

• 2025考研復試伴學班
• 2025考研復試標準班
• 2026考研英語全程班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 天津大學2025考研專業課復習資料「真題▪筆記▪講義▪題庫」

姓名（中文/漢語拼音）張連洪
職稱教授、博導
職務博士生導師
專業機械工程
所在系、所機械工程系、機器人與汽車技術研究所
通訊地址天津大學機械工程學院,300072
電子信箱zhanglh@tju.edu.cn
辦公室電話+86(0)22 27405294
傳真+86(0)22 87402173
 主要學歷:
1978.10-1982.06 哈爾濱工業大學壓力加工專業，本科生，獲工學學士學位
1982.09-1985.06 哈爾濱工業大學壓力加工專業，研究生，獲工學碩士學位
1987.09-1991.03 清華大學壓力加工專業，博士研究生, 獲工學博士學位
主要學術經歷:
1985.07-1987.09 天津大學機械工程系助教；
1991.04-1993.12 天津大學機械工程系講師；
1994.01-1999.11 天津大學機械工程系、天津大學內燃機研究所副教授、碩士研究生導師
1999.12-2004.09 天津大學機械工程學院機械工程系教授、碩士研究生導師
2004.09-至今 天津大學機械工程學院機械工程系教授、博士研究生導師
主要研究方向:
1. 制造裝備與系統設計方法
2. 近凈塑性成形技術
主要講授課程:
1. 現代設計方法(研究生 32學時)
2. 模具設計與制造(本科生 32學時)
主要學術兼職:
天津市塑性工程(鍛壓)學會理事
中國塑性工程學會精密鍛造學術委員會委員
主要學術成就、獎勵及榮譽:
主持國家自然科學基金項目、863計劃課題、省部及橫向課題20余項，獲天津市科學技術進步一、二等獎各1項，在Journal of Power Sources和Science in China(中國科學)等刊物發表論文60余篇。
 
主要科研項目及角色:
1. 國家自然科學基金資助項目“基于復雜加工對象精度需求的高性能復雜制造裝備主動精度設計方法”（項目編號：50875182），2009.1-2011.12，項目負責人
2. 基于電磁偏轉軌跡控制的拋射式快速成型工藝技術研究，國家自然科學基金項目(項目編號：50075062)，2001.1-2003.12，項目負責人
3. 質子交換膜燃料電池接觸電阻特性多尺度建模與實驗研究，高等學校博士學科點專項科研基金項目(項目編號：20050056006)，2006.1-2007.12, 項目負責人
4. 國家高技術研究發展計劃資助項目（863計劃）課題“系統性能驅動的復雜制造裝備優化設計技術”（課題編號：2006AA04Z127），2006.12-2008.12，項目負責人
5. “高檔數控機床與基礎制造裝備”科技重大專項課題“YKW51250數控插齒機”（課題編號：2010ZX04001-191），2010.1-2011.12，子課題負責人
6. “高檔數控機床與基礎制造裝備”科技重大專項課題“YKW2075數控螺旋錐齒輪磨齒機”（課題編號：2011ZX04002-032），2011.1-2012.12，主要參加人
7. 機械產品創新和快速設計關鍵技術研究——液壓機模塊化快速設計及面向制造的CAD/CAPP/CAM系統, 天津市自然科學重大基金項目(項目編號：003804711)，2000.1-2002.1，第2完成人
8. 大型曲軸全纖維彎曲鐓鍛成形工藝CAE及工藝優化，天津市自然科學基金項目（項目編號：013605011），2002.9-2004.4，第1完成人
9. “科技部快速原型制造技術生產力促進中心(天津)”建設，國家重點科技項目(攻關)計劃專題項目（項目編號：96-A22-02-043），1997.1-1999.10，第2完成人
10. 新一代內燃機超精密偶件加工技術研究，天津大學“十五”“211工程”學科建設項目，2003.11~2006.12，項目負責人
代表性論著:
JOURNAL PAPERS
(1) Cui Xintao, Wang Shuxin, Zhang Lianhong. Lightweight Automotive Doors Design Including Material and Manufacturing Process Selection, International Journal of Manufacturing Technology and Management, 14(1-2):118-129, 2008.
(2) Xu Yanwei, Zhang Lianhong, Liu Dequan, Wang Wei. Study on 3D Virtual Simulation Machining of Spiral Bevel Gear, China Mechanical Engineering, 19(22):2703-2707, 2008 (in Chinese).
(3) Xu Yanwei, Xiao Tieling. Wei Wei, Liu Dequan, Zhang Lianhong. Modeling and Virtual Machining of Chamfering Tooth Crest of Spiral Bevel Gear, Transactions of the Chinese Society of Agricultural Machinery, 39(9): 161-165, 2008 (in Chinese).
(4) Li Yancong, Zhang Lianhong, Zhang Chun, Wang Minghong. Analysis of Die Structural Design Considering Equipment Factors and Driven by the Formed Products' Precision, Mechanical Science and Technology for Aerospace Engineering, 27(5):571-574, 2008 (in Chinese).
(5) Wang Shuxin, Xie Chungang, Wang Yanhui, Zhang Lianhong, Jie Weiping, S. Jack Hu. Harvesting of PEM Fuel Cell Heat Energy for a Thermal Engine in an Underwater Glider, Journal of Power Sources, 169(2):338-346, 2007.
(6) Bai Yajiang, Zhang Lianhong, Ren ChenZu. Experimental Investigation on Honing of Small Holes, Key Engineering Materials, 329(1):303-308, 2007
(7) Cui Xintao, Wang Shuxin, Bi Fengrong, Zhang Lianhong. Multi-Criterion Optimal Design of Automotive Door Based on Metamodeling Technique and Genetic Algorithm, Transactions of Tianjin University, 13(3):169-174, 2007.
(8) Zhang Lianhong, Jie Weiping, Xie Chungang, Xu Jiafu, Song Haimin. Effects of Temperature, Pressure and Humidity on Electric Efficiency of PEMFC Stack, Journal of Tianjin University, 40(5):594-598, 2007 (in Chinese).
(9) Zhang Lianhong, Liu Ying, Song Haimin, Wang Shuxin, Zhou Yuanyuan, S. Jack Hu. Estimation of Contact Resistance in Proton Exchange Membrane Fuel Cells, Journal of Power Sources, 162(2):1165-1171, 2006.
(10) Cui Hongxiang, Gong Jiangong, Zhang Lianhong. Strength and Toughness Reinforcement of Biodegradable Material Poly (DL-lactic acid) by Intensified Shearing Plastic Deformation, China Plastics, 19(11):58-62, 2005. (in Chinese)
(11) Li Xiaojing, Li Shuangyi, Zhang Lianhong, Bi Dasen, Zhang Jian. Study of Technology of Self-piercing Riveting and Improved Approach, Journal of Tianjin Institute of Technology, 21(5):61-64, 2005 (in Chinese).
(12) Li Maochun, Zhang Lianhong, Wan Shumin, Wang Shuxin. Finite Element Simulation of Forming Process for Thin Metallic Flow Field Plate of Proton Exchange Membrane Fuel Cell (PEMFC), Chinese Journal of Power Sources, 29(8):502-504, 2005(in Chinese).
(13) Zhang Lianhong, Li Shuangyi. Mechanisms of Plastic Deformation for Powder Materials in Cold Working, Science in China, Ser. E, 46(4):432-638, 2003.
(14) Zhang Lianhong, Li Shuangyi, Zhang Baofeng, Xiong Xiaoming. Principle and Feasibility of Electric or Magnetic Field Deflection-Projection Based Rapid Prototyping Technique, Transactions of Tianjin University, 9(1):41-44, 2003.
(15) Zhang Yang , Zhang Lianhong, Li Shuangyi, Wang Hongzhi. Sheet Metal Forming Simulation and Its Application in Stamping Process of Automobile Panels, Transactions of Tianjin University, 8(4):269-272, 2002.
(16) Fan Haiqing, Li Shuangyi, Zhang Lianhong, Cui Hongxiang, Sun Liguo. Analysis and Comparison to RR-Method and TR-Method of Crankshaft Upset Forging, Metalforming Machinery, 29-31, 2002 (in Chinese).
(17) Xu Yanshen, Hou Liang, Zhang Lianhong, Li Sen. Theory of the Generalized Modular Design of Hydraulic Press and It’s Application, Machine Design, (7):1-3,41, 2001 (in Chinese).
(18) Zhang Lianhong, Cui Guoqi, Zhong Honghui, Wang Jian, Zhao Tao. Rapid Prototype Based Rapid Tooling, Machine Design, (9):36-38, 1999 (in Chinese).

CONFERENCE PAPERS
(1) Du Yunzhi, Zhang Lianhong, and Bai Yajiang. FEM Simulation of Drilling Processes with Twist Drill and Deep-hole Drill (Gundrill), The International Conference on Mechanical Engineering and Mechanics, Oct. 26-28, 2005, Nanjing, China.
(2) Zhang Lianhong, Wang Zutang. Investigation on the Textured Forming Mechanism and Method of Ceramic High Temperature Superconducting Tapes, The 1st International Conference on Processing Materials for Properties, Nov. 7-11, 1993, Hawaii.
(3) Ren Xueping, Zhang Lianhong. Theoretical Calculation of Flow Stress of Materials, The 4th Conference of Asia-Pacific Congress on Strength Evaluation, Oct. 8-10, 1991, Beijing, China.